Opening a contractor merchant account through 2Accept puts your business on a dedicated MID underwritten for the long job — a deposit at signing, progress draws as the work reaches each milestone, change orders along the way, and a final payment at completion — with your deposit percentage, job length, and largest draw agreed with the acquiring bank before the first card is run, so a $15,000 deposit on a kitchen remodel is a scheduled payment and not an event an aggregator's risk team freezes while your crew waits. Our contractor merchant accounts include general contractors, remodelers, roofers, HVAC installers, electricians, landscapers and hardscapers, and specialty trades under a single underwriting relationship.
The process of opening a contractor merchant account with 2Accept takes four steps. First, complete the online application with your EIN, formation documents, three months of bank statements and any processing statements, the contractor license, bond and insurance that apply to your work, a sample contract showing your deposit and progress-payment schedule, your typical job size and duration, and your cancellation and change-order terms. Second, a dedicated underwriter reviews your deposit percentage, the time between each payment and the work it pays for, your largest draw, your commercial-to-residential mix, and your dispute history within one business hour. Third, you receive a dedicated MID and set up emailed invoices and payment links for draws, a virtual terminal for the office, a card reader for payments at the job site, and Level 2 and Level 3 data for commercial cards after signing the merchant processing agreement. Fourth, you go live in 48 hours with ticket limits sized to your draws and chargeback alerts already configured.
Rates for a contractor merchant account on 2Accept start at 2.89% + $0.20, the low tier, with interchange-plus pricing standard above roughly $250,000 a month. Pricing depends on monthly volume, average and largest draw, how far ahead of the work your deposits are collected, the share of invoiced and keyed payments, how much of your volume is on commercial and purchasing cards that can qualify for Level 2 and Level 3 interchange, and your chargeback history.
Contractors judge a processor on whether the money for a job arrives when the schedule says it will — whether a deposit funds or freezes, whether a draw the price of a pickup truck clears without an email asking what it was for, what a commercial card costs once the right data is sent with it, and what happens when a client disputes a payment eight weeks into a build. 2Accept covers each of those below and underwrites the trades, billing structures, and ticket sizes listed here.
2Accept underwrites the building and improvement trades — general contractors, kitchen and bath remodelers, roofing and siding companies, HVAC installers, electricians, landscapers and hardscapers, concrete and masonry, flooring, painting, fencing, pools, and window and door installers. The card networks give these trades their own category codes — general contractors, electrical, roofing and siding, heating and air conditioning, landscaping, and special trades among them — and all price at the low tier.
What separates one contractor's file from another's is not the trade but the calendar: how much is collected at signing, how long the job runs, and how closely each payment tracks completed work. A roofer paid on a two-day job and a builder holding a deposit for three months are underwritten differently, and the account is set up for whichever you are.
Apply for a Contractor MID →When a contractor charges a deposit, the acquiring bank takes on a contingent risk: if the job never happens, the cardholder can dispute the charge, and the bank is liable for money already paid out if the contractor cannot return it. That is future-delivery exposure, and it is what acquirers underwrite in this trade — how much is taken before work starts, and how many weeks pass before the client has something to show for it. Smaller draws tied to milestones carry far less exposure than half the contract at signing.
2Accept puts your payment schedule in the file at approval: deposit percentage, draw milestones, typical job length, and largest single payment. Draws that follow the schedule fund on the normal cycle. Where deposits are large or lead times long, an acquirer may ask for a reserve or a cap on outstanding deposits, and you will see those terms before you sign.
Apply for a Progress Billing MID →A contractor's ordinary payment is larger than many small merchants' monthly volume. A cabinet deposit, a roof paid in full once the homeowner's insurance claim has been paid, a draw on a commercial tenant fit-out — these are keyed or invoiced, card-not-present, and many times the size of anything a pooled risk model expects from a small business. Size alone is enough to trigger a hold on an aggregator, and the hold can extend to the whole balance, not just the one payment.
On a dedicated MID the approved high ticket and monthly volume are set from your real job sizes, so a five-figure invoice is ordinary. Card issuers still decline some very large charges on their own side until the cardholder confirms them, so we suggest clients call their bank before paying a large draw by card.
Apply for a High-Ticket MID →Contractor chargebacks are rarely fraud. They are disagreements — the work is not finished, not what was agreed, or the client cancelled and wants the deposit back — and the card networks decide them on documents. The contractor who wins has a signed contract with the scope and payment schedule, a deposit and cancellation policy the client acknowledged, change orders signed before the extra work was done, and dated photos showing what was complete when each draw was charged.
The weakest point is nearly always the change order agreed verbally on site and billed later. 2Accept's dispute team builds representment from your paperwork, and during onboarding the underwriter reads your contract for the clauses a card dispute turns on. That is a payments review, not legal advice; your attorney should own the contract itself.
Apply for a Dispute Defense MID →Contractors doing commercial work, tenant improvements, or jobs for property managers and facilities departments are often paid on corporate and purchasing cards. Those cards carry some of the highest interchange in the system unless the transaction arrives with additional detail. Level 2 adds fields such as tax amount and a customer code or PO number; Level 3 adds line items. Sent correctly, they can qualify the payment for lower commercial interchange categories.
2Accept supplies the Level 2 and Level 3 fields through the gateway, and on interchange-plus pricing the lower interchange reaches you directly. It applies to eligible commercial cards only; a homeowner's rewards card does not qualify, whatever data accompanies it.
Apply for a Commercial Card MID →Most contractor payments start as an invoice. 2Accept provides emailed invoices and payment links that open a hosted payment page, a virtual terminal for a card read over the phone, and a card reader for payments at the job site or the office. Contractors manage jobs in Buildertrend, JobNimbus, AccuLynx, Procore, Houzz Pro or Jobber, and keep the books in QuickBooks; where that software supports an outside gateway such as NMI or Authorize.net, the MID sits behind it.
Several of those platforms run payments through their own built-in processor and do not accept an outside account. In that case the MID runs alongside: the draw is paid on a 2Accept link and marked paid in the job software. It is one more step, and on five-figure draws it is usually worth taking.
Apply for an Invoicing MID →Every merchant account is priced by risk tier. Your vertical, volume, and chargeback ratio determine which tier underwrites you. Contracting underwrites at the low tier: the trades are licensed and disputes are infrequent. What varies from one contractor to the next is deposit exposure, which shapes limits and any reserve more than it shapes the rate, and interchange-plus pricing is standard above roughly $250,000 a month. Rates are average and may vary depending on individual circumstances and risk profile. Interchange may be passed to merchants for more challenging approvals.
Complete the 4-minute application. No credit pull, no application fee, no long-term contract.
A 2Accept underwriter reviews your contract, deposit percentage, draw schedule, job length, and dispute history within 1 business hour.
Sign your MPA, receive your MID, and set up invoices, payment links, a virtual terminal, and a reader for the job site.
Charge deposits and draws on the schedule in your contract, send Level 2/3 data on commercial cards, and keep the paperwork that wins disputes.
Connect your merchant account to the storefront, POS, accounting, and CRM software you already run.
2Accept enables smooth payment operations across Shopify stores.
2Accept connects with Clover POS for seamless point-of-sale transactions.
2Accept syncs payments with QuickBooks to simplify accounting and reconciliation.
2Accept supports BigCommerce to facilitate online payment processing.
2Accept integrates with Authorize.net for secure transactions.
2Accept connects with Salesforce to streamline customer relationship management.
2Accept extends payment capabilities to WooCommerce-powered online stores.
Aggregators do not underwrite a contract; they watch transactions. A pooled account has no idea that the $18,000 charge it just saw is the second draw on a signed remodel, so it treats it as what it resembles statistically — an outlier — and holds it, sometimes with the rest of the balance. For a contractor that is a stopped job: subs unpaid, materials unordered, a client asking why. A dedicated MID from 2Accept is underwritten on your contract and draw schedule before the first payment.
| Feature | 2Accept | Stripe | Square | PayPal |
|---|---|---|---|---|
| Deposit and draw schedule underwritten before boarding | ✓ | ✕ | ✕ | ✕ |
| High ticket set to your largest progress payment | ✓ | ✕ | ✕ | ✕ |
| Contract reviewed for dispute evidence at onboarding | ✓ | ✕ | ✕ | ✕ |
| Named underwriter to call ahead of an oversize draw | ✓ | ✕ | ✕ | ✕ |
| Dispute team that builds representment from your contract | ✓ | ✕ | ✕ | ✕ |
| Dedicated MID (not aggregator pool) | ✓ | ✕ | ✕ | ✕ |
| Human underwriter (not chatbot) | ✓ | ✕ | ✕ | ✕ |
Every 2Accept contractor merchant account includes the monitoring and dispute tooling needed to keep ratios well under card-network monitoring thresholds — and in contracting, where a single dispute can equal a month's volume, that means evidence prepared at signing and not after the claim.
Ethoca and Verifi alerts flag a dispute before it posts, which on a five-figure draw gives you time to call the client and resolve a punch-list complaint directly.
Keyed and payment-link payments are checked with AVS, CVV and velocity rules, catching the stolen card used for a deposit on a job that was never real.
3-D Secure 2 on online invoice payments has the cardholder authenticate with their bank, shifting fraud liability to the issuer on large card-not-present draws.
Our dispute team responds with the signed contract, change orders, dated photos and client messages, and cases typically resolve within 45 days.
Contractors with separate divisions or entities can run 2–5 MIDs, so a dispute on the roofing side never touches the remodeling account's ratio.
The descriptor shows the company name on the contract and the yard sign plus a phone number, so a spouse or bookkeeper recognizes a large charge.
"Our processor froze a $22,000 draw and then the whole balance, in the middle of a kitchen. I had subs to pay that Friday. Having the draw schedule approved up front changed how I sleep."
"A client disputed the final payment over a change order we agreed to in the driveway. We lost. Every change order is signed now, and the next dispute went our way."
"Half our work is for property managers paying on purchasing cards. Nobody told us line-item data changes what those cards cost until we moved."
A contractor merchant account is a dedicated payment-processing account that an acquiring bank issues to a construction or home-improvement business, underwritten for deposits taken before work begins and progress payments billed over jobs lasting weeks or months, with ticket limits sized to five-figure draws, Level 2 and Level 3 data for commercial cards, and dispute handling built on the signed contract, in place of a pooled aggregator account that sees only isolated large charges.
The account permits invoiced and payment-link payments on a hosted page, keyed payments through a virtual terminal, in-person payments on a card reader, and stored cards for scheduled draws with the client's consent. It operates under underwriting terms that record the contractor's deposit percentage, milestone schedule, job length and largest draw, and includes Level 2 and Level 3 data for commercial and purchasing cards, Ethoca and Verifi alerts, representment by a dispute team, and discount rates from 2.89% + $0.20.
Contracting is treated carefully by payment companies for one reason: the contractor is paid before the work exists. A cardholder who pays a deposit and does not receive the job can dispute the charge months later, and if the contractor cannot repay, the acquiring bank absorbs the loss. Acquirers call this future-delivery exposure and measure it as money collected against work not yet delivered. An aggregator does not measure it at sign-up; it approves instantly and reacts later, when a large keyed charge appears on an account with little history, by holding the payment or the entire balance. The second difficulty is ticket size, since a single draw can exceed a small merchant's monthly volume. The third is that disputes are contractual, not fraudulent, so they are won or lost on documents. Acquirers underwriting a contractor weigh deposit size, job duration, how closely billing follows completed work, licensing, bonding and insurance, financial strength, time in business, and dispute history.
Opening a contractor merchant account differs from signing up with an aggregator in three ways. First, the payment schedule is underwritten: deposit percentage, draw milestones and job length are agreed with the acquirer before boarding, so scheduled payments are expected. Second, limits fit the work, with an approved high ticket and monthly volume set from real job sizes and backlog instead of a generic small-business profile. Third, disputes are handled on the contract: the underwriter reviews your agreement for the clauses a card dispute turns on, and a dispute team builds representment from the signed scope, change orders and progress photos.
2Accept underwrites contractor merchant accounts for general contractors, remodelers, roofing and siding companies, HVAC installers, electricians, landscapers and hardscapers, concrete, flooring, painting, fencing and pool contractors, and commercial tenant-improvement firms across the United States. Applications are reviewed by a dedicated underwriter within one business hour and can go live in 48 hours depending on documentation, with invoicing, payment links, a virtual terminal and card readers set up after signing the merchant processing agreement.
Acquiring banks sort contractors by job length, deposit practice, and whether the customer is a homeowner or a business. The businesses 2Accept underwrites most often are:
A dedicated contractor merchant account gives a contracting business advantages a pooled aggregator account does not, because it is underwritten on your contract and payment schedule instead of on isolated transactions:
Qualifying for a contractor merchant account means meeting documentation, entity and operational requirements that the acquiring bank reviews during underwriting. Standard qualification criteria include:
Keeping a contractor merchant account healthy depends on keeping billing close to completed work and keeping paper on everything, because acquirers review accounts on a rolling basis and one lost dispute on a large draw can move a small contractor's ratio sharply. The practices that protect a contractor MID are:
No. The account runs month to month. You are not tied to a term, and closing it carries no termination fee.
Your EIN and formation documents, ID for each principal, three months of bank statements, any processing statements, the license, bond and insurance that apply to your work, and a sample customer contract showing your deposit, payment schedule, and cancellation and change-order terms.
Because the contract is the account. It shows how much you collect before work starts, when each later payment falls due, and what a client agreed to about cancellation — the facts that determine both the acquirer's exposure and whether you can win a dispute. Send the version you actually use.
Yes, and it is a common reason contractors apply. A freeze on a large payment reflects pooled underwriting, not a problem with your business. Include the contract for the frozen job with your application.
Yes. Expect conservative limits at first, set from your bank statements, license and the jobs you have under contract, and reviewed upward as history builds.
Personal credit is one factor among several. License, insurance, bank balances and backlog matter, and the first review is a soft check with no credit pull.
Acquirers generally verify whatever license your trade requires where you work. Requirements vary widely by state, trade and job size; tell us what applies to you, and confirm the rules with your licensing board, not with us.
No. We charge nothing to apply or to be underwritten.
Contracting underwrites at the low tier, from 2.89% + $0.20. Above roughly $250,000 a month, interchange-plus pricing is standard: interchange passed through plus a fixed markup disclosed in writing before you sign.
Sometimes not, and we would rather you ran the number. At roughly 3%, the fee on a $30,000 draw is around $900. Many contractors take cards for deposits and smaller draws, where speed and convenience win the job, and steer large progress payments to check, bank transfer or client financing. A merchant account does not oblige you to accept a card for every payment.
Possibly. Surcharging falls under card-brand rules — credit cards only, never debit, capped, and disclosed in advance — and under state law, which restricts or prohibits it in some states. It is not available everywhere; confirm what applies in your state before putting a fee in a contract.
They let eligible corporate and purchasing cards settle at lower commercial interchange categories. The amount depends on the card and the network, so we show it on your own statement instead of quoting a figure.
All of them are written into the agreement you sign: the rate and per-item fee, any monthly gateway fee, and a per-dispute chargeback fee, commonly $15–$25. Nothing is charged to apply or to leave.
It depends on your deposit exposure. A contractor paid on completion or in small milestone draws often has none. One collecting large deposits months ahead of the work, or newly in business, may be asked for a reserve of up to 10% or a cap on outstanding deposits. Either is disclosed before you sign.
Next-day funding is typical for payments within your approved limits.
A per-dispute fee, commonly $15–$25, set out in your agreement. In contracting the fee is trivial next to the disputed amount, which is why the evidence matters.
It is the money you have collected for work not yet done. If a job fails, cardholders can dispute those payments and the acquiring bank is liable if you cannot repay. It is the main thing an acquirer measures in a contractor's file.
Whatever your contract provides, within the limits approved on your account. Some states cap deposits on home-improvement contracts, so confirm your state's rule; acquirers also prefer deposits in proportion to early costs.
Yes, with the client's written consent to the schedule. Even then, send an invoice before each draw; a client surprised by a charge disputes it.
Each draw pays for work already visible on site, so little money is ever outstanding against undelivered work. Lower exposure supports higher limits and makes a reserve less likely.
Tell the client in writing, and tell your underwriter if the delay is long. A deposit sitting against no work is the classic dispute, and a documented revised schedule is your defense.
That is a legal question, not a card-processing one, and the answer varies by state and by the type of work; some jurisdictions have rules on how construction deposits are held or used. We do not advise on it. From the acquirer's side, what matters is that you can refund a deposit if a job is cancelled, so underwriters look at your balances next to the deposits you are holding.
Yes. Use the card reader on site or send a link once the client signs the completion sheet. A chip or tap read at the walkthrough is the cleanest way to take a final payment.
As its own invoice, referencing the signed change order, when it is agreed or at the next draw. Folding unsigned extras into a later payment is how contractors lose disputes they should win.
They approve accounts without underwriting job sizes, so a five-figure keyed payment on a young account looks like an outlier. The automated response is to hold it and ask questions, and the hold can extend to your whole balance. A dedicated MID has your draw sizes approved in advance.
Your approved high ticket, set from the draw sizes in your contracts. If a job calls for more, ask for a review before you invoice it; limits are raised on evidence such as the signed contract.
Usually the client's own bank. Issuers often block a charge far above a cardholder's normal spending until the cardholder confirms it. Ask clients to call their bank before paying a large invoice by card.
Not to get around a limit or a decline; card rules treat that as a split sale. Separate scheduled payments under your contract are fine, because each is its own agreed amount.
Many do. Property managers, facilities teams and franchise operators use purchasing cards for speed and for the float. Level 2 and Level 3 data keep those payments from costing more than they should.
Yes. The homeowner pays you by card, check or link once they have the claim funds. From a payments view, your contract should be with the cardholder who pays.
A complete file is usually reviewed inside one business hour and processing within 48 hours.
Not at the first stage, which is a soft review with no credit pull. If a hard pull is needed later, you are told before it happens.
Three kinds: work not completed, work not as agreed, and a cancelled job where the client wants the deposit back. They are winnable when you hold a signed contract, signed change orders, and proof of what was complete at each payment. They are hard to win on a handshake.
It helps only if the client clearly agreed to it before paying — signed or initialed, not buried. Card networks look for disclosure and acknowledgment, and evidence of costs you incurred strengthens the response.
They can try, as a not-as-described claim, and they are generally expected to raise it with you first. A documented offer to return and correct the punch list, plus a signed completion sheet where you have one, is the core of the response.
That is a question for a construction attorney in your state. A card dispute and a lien are separate processes with separate deadlines, so do not let one lapse while fighting the other.
Once our team files your evidence, most cases are decided within about 45 days.
Scope, price, payment schedule, deposit and cancellation terms the client acknowledges, and a change-order procedure. Have your attorney draft it; we only flag payment-evidence gaps.
One loss does not close an account, but on low transaction counts it moves your ratio sharply. Tell your underwriter early; context and a clean record on either side of it count for a lot.
Ethoca and Verifi alerts arrive before the dispute posts. On a job in progress that is your cue to call the client, find the real complaint, and fix it before the bank is involved.
Square and Stripe approve in minutes without reading a contract, then react to large payments as they appear. 2Accept underwrites your deposit and draw schedule first and sets limits to your real job sizes.
If your clients pay by check or bank transfer, your jobs are large, and nobody is asking to pay by card, a merchant account adds cost without adding sales. It earns its keep when cards win you deposits faster, when commercial clients insist on purchasing cards, or when a held payment has already cost you a week.
Built-in payments post to the job automatically, which is worth something. In exchange you accept the platform's pricing, its underwriting and its hold policy, none of which you negotiate. If you have never had a payment held and the rate suits you, stay. If you have, a MID alongside the software costs one extra step per draw.
Yes. Financing programs are separate from your merchant account and can sit beside it; many contractors offer both.
A bank's program is a dedicated account as well, typically run by a large processor. Compare contract length, termination fees, equipment leases, and whether anyone will review your draw schedule before boarding. 2Accept is not a bank; it places contractors across a panel of more than 40 acquiring banks.
They are gateways: the software that carries a payment to the acquiring bank. The merchant account sits behind the gateway, and we set up both.
Yes. The software stays; payments run through a supported gateway or on 2Accept invoices alongside it.
Yes. A roofing company and a remodeling company under common ownership can each hold a MID under one underwriting relationship, with separate statements, descriptors and dispute ratios.
Send us your standard contract and a recent statement, and we'll tell you what deposit exposure, ticket limits and rate your business underwrites at. The review is free, there's no application fee, and an underwriter replies fast.
Start Your ApplicationContracting businesses spread across trades as they grow — a remodeler takes plumbing in-house, a roofer adds solar or gutters under a second entity, a general contractor starts managing the rental properties it renovates, a landscaper sells outdoor furniture and kitchens from a showroom. Each of those is underwritten on a different basis, because the time between payment and delivery is different in each. 2Accept underwrites these adjacent businesses under the same acquiring relationships, so one owner can hold several MIDs without restarting underwriting from scratch.
If your contracting business runs through several entities — a general contracting company, a separate roofing or HVAC division, and a property company that holds the rentals you renovate — 2Accept can structure a separate MID for each under one underwriting relationship. Each MID is underwritten on its own deposit exposure and monitored independently, so a dispute on one job or one division does not affect the others.
Apply now and let's build your business — without hesitation.
SPEAK TO A PAYMENT EXPERT